User's Manual

https://www.peplink.com 11 Copyright @ 2019 Peplink
4 Product Features
Peplink Balance Series products enable all LAN users to share broadband Internet
connections and provide advanced features to enhance Internet access. The following
is a list of supported features:
4.1 Supported Network Features
4.1.1 WAN
● Multiple public IP support (DHCP, PPPoE, static IP address)
● Static IP support for PPPoE
● 10/100/1000Mbps Ethernet connection in full/half duplex
● Built-in HSPA and EVDO cellular modems
● USB mobile connection (only one USB modem can be connected at a time)
● Drop-in mode on selectable WAN port with MAC address passthrough network address
translation (NAT) / port address translation (PAT)
● Inbound and outbound NAT mapping
● Multiple static IP addresses per WAN connection
● MAC address clone
● Customizable MTU and MSS values
● WAN connection health check
● Dynamic DNS (supported service providers: changeip.com, dyndns.org, no-
ip.org,tzo.com, and DNS-O-Matic)
● Ping, DNS lookup, and HTTP-based health check
4.1.2 LAN
● DHCP server on LAN
● Extended DHCP option support
● Static routing rules
● Local DNS proxy server
● VLAN on LAN support
4.1.3 VPN
● Secure SpeedFusion
TM
● SpeedFusion performance analyzer
● X.509 certificate support (feature activation required on some Balance models)
● Bandwidth bonding and failover among selected WAN connections
● Ability to route traffic to a remote VPN peer
● Optional pre-shared key setting
● Layer 2 bridging
● Layer 2 Peer Isolation
● SpeedFusion
TM
throughput, ping, and traceroute tests