Product Card

https://www.peplink.com 155 Copyright @ 2019 Peplink
Tip
A system administrator can use the traceroute utility to analyze the connection path of a LAN/WAN connection.
12.5 Wake-on-LAN
Peplink routers can send special “magic packets” to any client specified from the Web UI. To
access this feature, navigate to System > Tools > Wake-on-LAN
Select a client from the drop-down list and click Send to send a “magic packet”
12.6 CLI (Command Line) Support
The serial console connector on some Peplink Balance units is RJ-45. To access the
serial console port, prepare a RJ-45 to DB-9 console cable. Connect the RJ-45 end to
the unit's console port and the DB-9 end to a terminal's serial port. The port setting will
be 115200,8N1.
The serial console connector on other Peplink Balance units is a DB-9 male connector.
To access the serial console port, connect a null modem cable with a DB-9 connector
on both ends to a terminal with the port setting of 115200,8N1.