Users Manual

https://www.peplink.com 184 Copyright @ 2020 Peplink
The test can be run again once it’s complete by clicking the Start button or you can click Close and change
the parameters for the test.
11.7 CLI (Command Line) Support
The serial console connector on some Peplink Balance units is RJ-45. To access the serial console port,
prepare a RJ-45 to DB-9 console cable. Connect the RJ-45 end to the unit's console port and the DB-9 end
to a terminal's serial port. The port setting will be 115200,8N1.
The serial console connector on other Peplink Balance units is a DB-9 male connector. To access the serial