Users Manual

https://www.peplink.com 165 Copyright @ 2020 Peplink
Confirm User
Password
This field allows you to verify and confirm the new user password.
Web Session
Timeout
This field specifies the number of hours and minutes that a web session can
remain idle before the Pepwave router terminates its access to the web admin
interface. By default, it is set to 4 hours.
Authentication by
RADIUS
With this box is checked, the web admin will authenticate using an external
RADIUS server. Authenticated users are treated as either "admin" with full read-
write permission or “user” with read-
only access. Local admin and user accounts
will be disabled. Wh
en the device is not able to communicate with the external
RADIUS server, local accounts will be enabled again for emergency access.
Additional authentication options will be available once this box is checked.
Auth Protocol
This specifies the authentication protocol used. Available options are MS-
CHAP
v2 and PAP.
Auth Server This specifies the access address and port of the external RADIUS server.
Auth Server
Secret
This field is for entering the secret key for accessing the RADIUS server.
Auth Timeout This option specifies the time value for authentication timeout.
Accounting
Server
This specifies the access address and port of the external accounting server.
Accounting
Server Secret
This field is for entering the secret key for accessing the accounting server.
Network
Connection
This option is for specifying the network connection to be used for authentication.
Users can choose from LAN, WAN, and VPN connections.
CLI SSH
The C
LI (command line interface) can be accessed via SSH. This field enables
CLI support. For additional information regarding CLI, please refer to
Section
30.5.
CLI SSH Port This field determines the port on which clients can access CLI SSH.
CLI SSH Access
This menu allows you to choose between granting access to LAN and WAN
clients, or to LAN clients only.
Security
This option is for specifying the protocol(s) through whic
h the web admin interface
can be accessed:
HTTP
HTTPS
HTTP/HTTPS