Users Manual

https://www.peplink.com 153 Copyright @ 2020 Peplink
VLAN ID
that no VLAN tagging will be applied.
NOTE: Change this value with caution as alter
ations may result in loss of connection to
the AP Controller.
Operating
Schedule
Choose from the schedules that you have defined in System>Schedu
le. Select the
schedule for the integrated AP to follow from the drop-down menu.
Beacon Rate
A
This option is for setting the transmit bit rate for sending a beacon. By default, 1Mbps
is
selected.
Beacon Interval
A
This option is for setting the time interval between each beacon. By default, 100ms
is
selected.
DTIM
A
This field allows you to set the frequency for the beacon to include delivery traffic indication
messages. The interval is measured in milliseconds. The default value is set to 1 ms.
RTS Threshold
A
The RTS (Request to Clear) threshold determines the leve
l of connection required before
the AP starts sending data. The recommended standard of the RTS threshold is around
500.
Fragmentation
Threshold
A
This setting determines the maximum size
of a packet before it gets fragmented into
multiple pieces.
Distance / Time
Convertor
Select the range you wish to cover with your Wi-
Fi, and the router will make
recommendations for the Slot Time and ACK Timeout.
Slot Time
A
This field is for specifyin
g the unit wait time before transmitting a packet. By default, this
field is set to 9 µs.
ACK Timeout
A
This field is for setting the wait time to receive an acknowledgement packet before
performing a retransmission. By default, this field is set to 48 µs.
Frame
Aggregation
A
This option allows you to enable frame aggregation to increase transmission throughput.
A
- Advanced feature, please click the button on the top right-hand corner to activate.