Users Manual

https://www.peplink.com 149 Copyright @ 2020 Peplink
Security Policy
This setting configures the wireless authentication and encryption methods.
Available options are :
Open (No Encryption)
WPA2 -Personal (AES:CCMP)
WPA2 – Enterprise
WPA/WPA2 - Personal (TKIP/AES: CCMP)
WPA/WPA2 – Enterprise
When WPA/WPA2 - Enterprise is configured, RADIUS-
based 802.1 x authentication
is enabled. Under this configuration, the Shared Key
option should be disabled. When
using this method, select the appropriate version using the V1/V2
controls. The
security level of this method is known to be very high.
When WPA/WPA2- Personal
is configured, a shared key is used for data encryption
and authentication. When using this configuration, the Shared Key
option should be
enabled. Key length must be between eight and 63 characters (inc
lusive). The security
level of this method is known to be high.
Access Control
Restricted Mode
The settings allow administrator to control access using MAC address filtering.
Available options are None, Deny all except listed, and Accept all except listed
MAC Address
List
Connections coming from the MAC addresses in this list will be either denied
or
accepted based on the option selected in the previous field.
If more than one MAC address needs to be entered, you can use a carriage return to
separate them.