Users Manual

https://www.peplink.com 148 Copyright @ 2020 Peplink
Multicast Rate
A
This setting specifies the transmit rate to be used for sending multicast
network traffic. The selected Protocol and Channel Bonding
settings will
affect the rate options and values available here.
IGMP Snooping
A
To allow the Pepwave router to
listen to internet group management protocol
(IGMP) network traffic, select this option.
DHCP Relay
Put the address of
the DHCP server in this field..
DHCP requests will be relayed to this DHCP server
DHCP Option 82
A
If you use a distributed DHCP serv
er/relay environment, you can enable this
option to provide additional information on the manner in which clients are
physically connected to the network.
Layer 2 Isolation
A
Layer 2
refers to the second layer in the ISO Open System Interconnect
model.
Wh
en this option is enabled, clients on the same VLAN, SSID, or subnet are
isolated to that VLAN, SSID, or subnet, which can enhance security.
Traffic is
passed to upper communication layer(s). By default, the setting is disabled.
Maximum Number of
Clients
Indicate the maximum number of clients that should be able to connect to
each frequency.
Band Steering
To reduce 2.4 G
Hz band overcrowding, AP with band steering steers clients
capable of 5 GHz operation to 5 GHz frequency.
Choose between:
Force -
Clients capable of 5 GHz operation are only offered with 5 GHz
frequency.
Prefer - Clients capable of 5 GHz operation are enco
uraged to associate with
5 GHz frequency. If the clients insist to attempt on 2.4 GHz frequency, 2.4
GHz frequency will be offered.
Disable - Default
A
- Advanced feature. Click the button on the top right-hand corner to activate.
Security Settings