User's Manual

https://www.peplink.com 98 Copyright @ 2020 Peplink

Range

The IP rang

e is a contiguous group of private IP addresses used by the LAN host. The

system maps these addresses to a number of public IP addresses (specified below) to

facilitate outbound traffic. This option is only available when IP Range is selected.

Network

The

IP network refers to all private IP addresses and ranges managed by the LAN host.

The system maps these addresses to a number of public IP addresses (specified below)

to facilitate outbound traffic. This option is only available when IP Network is selected.

Inbound

Mappings

This setting specifies the WAN connections and corresponding WAN-

specific Internet IP

addresses on which the system should bind. Any access to the specified WAN

connection(s) and IP address(es) will be forwarded to the LAN host. This o

ption is only

available when IP Address is selected in the LAN Client(s) field.

Note 1: Inbound mapping is not needed for WAN connections in drop-

in mode or IP

forwarding mode.

Note 2: Each WAN IP address can be associated to one NAT mapping only.

Outbound

Mappings

This setting specifies the WAN IP addresses should be used when an IP connection is

made from a LAN host to the Internet.

Each LAN host in an IP range or IP network will be evenly mapped to one of each selected

WAN's IP addresses (for better

IP address utilization) in a persistent manner (for better

application compatibility).

Note 1: If you do not want to use a specific WAN for outgoing accesses, you should still

choose default here, then customize the outbound access rule in the Outbound Policy

section.

Note 2: WAN connections in drop-in mode or IP forwarding mode are not shown here.

Click Save to save the settings when configuration has been completed.

Important Note

Inbound firewall rules override inbound mapping settings.

7.7 MediaFast

MediaFast settings can be configured by navigating to Network > MediaFast.

Setting Up MediaFast Content Caching

To access MediaFast content caching settings, select Network > MediaFast.