User's Manual

https://www.peplink.com 81 Copyright @ 2020 Peplink
Routing Control
by Subnet
Database
When this function is enabled, the system will check to see if an incoming DNS client is within
any WAN's ISP subnet. Only the matched WAN(s)'s IP addresses will be returned. Note that
this feature is available only when a subnet database has been defined.
Default SOA / NS
Click the button to define a default SOA / NS record for all domain names.
When defining a default SOA record, Name Server IP Address
is optional. If left blank, the
Address (A) record for the same server should be defined manually in each domain.
For defining default NS records, the host [domain] indicates that this record is for the domain
name itself without a sub-domain prefix. To add a secondary NS server, just create a second
NS record with the Host
field left empty. When the entered name server is a fully qualified
domain name (FQDN), the IP Address field will be disabled.
Default
Connection
Priority
Default Connection Priority d
efines the default priority group of each WAN connection in
resolving A records. It applies to Address (A) records which have the Connection Priority
set to Default. Please refer to Section 17.3.9 for details.
The WAN connection(s) with the highest priorit
y (smallest number) will be chosen. Those
with lower priorities will not be chosen in resolving A records unless the higher priority ones
become unavailable.
To specify the primary and backup connections, click the button that corresponds to Default
Connection Priority. A selection screen screen will appear.
Each WAN connection is associated with a priority number. Click Save
to save the settings
when configuration is complete.
Domain name
This section shows a list of domain names to be hosted by the Peplink Balance. Each domain
can have its “NS”, “MX” and “TXT” records, and its sub-
domains’ “A” and “CNAME” records.
Add a new record by clicking the New Domain Name button. Click on a domain name to edit.
Press the red X to remove a domain name.
New Domain Name
Upon clicking the New Domain Name button, and the following screen will appear: