User's Manual

https://www.peplink.com 54 Copyright @ 2020 Peplink
address when hosts on the WAN access services served on this device (e
.g., web admin
accesses from WAN, DNS server, etc.)
WAN Default
Gateway
Enter the WAN router's IP address in this field. If there are more hosts in addition to the router
on the WAN segment, click the button next to “WAN Default Gateway” and check the I
have other host(s) on WAN segment
box and enter the IP address of the hosts that need
to access LAN devices or be accessed by others.
WAN DNS
Servers
Enter the selected WAN's corresponding DNS server IP addresses.
A
- Advanced feature, please click the button on the top right-hand corner to activate.
7.2.3 Port Settings
To configure port settings, navigate to Network > Port Settings
This section allows you to:
enable or disable specific LAN ports
Configure the negotiation speed of the LAN ports
Configure the port type (Trunk or Access)
Assign a VLAN to a LAN port (in Access mode)