User's Manual

https://www.peplink.com 108 Copyright @ 2020 Peplink
The setting is the same as Website type and you can refer to the description in the above section
For the Application type, you need to pack your application as below:
1. Implement two bash script files, start.sh and stop.sh in root folder, to start and stop your application.
the Mediafast router will only execute start.sh and stop.sh when the corresponding website is
enabled and disabled respectively.
2. Compress your application files and the bash script to tar.gz format.
3. Upload this tar file to the router.
MDM Settings
In addition to performing content caching, MediaFast-enabled routers can also serve as an MDM,
administrating to client devices. To access MDM Settings, navigate to Network > MDM Settings: