Datasheet

Ultrasonic sensor UC400-F77-EP-IO-V31
3
Release date: 2018-04-18 13:58 Date of issue: 2018-04-18 261243_eng.xml
Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Description of Sensor Functions
Adjustment possibilities
The sensor features a switching output with 2 programmable switch points. Programming the switch points, the output mode, the output logic and
the beam width can be done in two different ways:
- Using the sensor’s programming button
- Using the IO-link interface of the sensor. This method requires an IO-link master (e.g. IO-link-Master02-USB) and the associated software.
The download link is available on the product page for the sensor at www.pepperl-fuchs.
Synchronization
The sensor features a synchronization input for suppressing ultrasonic mutual interference („cross talk“).
The following synchronization modes are available:
1. Automatic multiplex mode.
2. Automatic common mode
3. Externally controlled synchronization
Further Documentation
- For information on programming via programming button and synchronisation you may refer to the commissioning instruction.
- For detailed information on application and programming via IO-Link we provide a manual.
Accessories
IO-Link-Master02-USB
IO-Link master, supply via USB port or separate power supply, LED indicators, M12
plug for sensor connection
V31-GM-2M-PVC
Female cordset, M8, 4-pin, PVC cable
V31-GM-1M-PVC-V1-G
Double-ended cordset, M8 to M12
OMH-ML7-01
Mounting aid for ML7 and ML8 series, Mounting bracket
OMH-ML7-02
Mounting aid for ML7 and ML8 series, Mounting bracket