Datasheet

7
■ Design permits installation in
confined spaces
Operating voltage
Detection range 30 mm … 300 mm 30 mm … 300 mm
Unusable area 0 mm … 30 mm 0 mm … 30 mm
Response time  63 ms  63 ms
Switching frequency –  7 Hz
Resolution max.  0.35 mm –
Temperature/
TEACH-IN connector
Parameterising interface RS 232 interface (Parameterisation with Windows-Software Ultra 2001)
Electrical data
Operating voltage 10 V DC … 30 V DC
Mechanical data
Ambient temperature 248 Kelvin … 343 Kelvin (-25 °C … +70 °C)
Protection IP65
Method of connection V15 plug connector (M12 x 1), 5-pin
Dimensions L 25 mm, Ø 18 mm L 25 mm, Ø 18 mm
Outputs
(Order code):
Analogue output (4 mA … 20 mA) and (0 V … 10 V) UC300-30GM-IUR2-K-V15
2 switch outputs pnp, N.O./N.C. UC300-30GM-E6R2-K-V15
Series -30GM-
with 2 switch outputs
or analogue output,
temperature compensated
remote M18 Sensor head
■ Design permits installation
in confined space
Operating data
Detection range 80 mm … 1000 mm 80 mm … 1000 mm
Unusable area 0 mm … 80 mm 0 mm … 80 mm
Response time  195 ms  195 ms
Switching frequency –  2.5 Hz
Resolution max.  0.35 mm –
Temperature/
TEACH-IN connector
Parameterising interface RS 232 interface (Parameterisation with Windows-Software Ultra 2001)
Electrical data
Operating voltage 10 V DC … 30 V DC
Mechanical data
Ambient temperature 248 Kelvin … 343 Kelvin (-25 °C … +70 °C)
Protection IP65
Method of connection V15 plug connector (M12 x 1), 5-pin
Dimensions L 27 mm, Ø 30 mm L 27 mm, Ø 30 mm
Outputs
(Order code):
Analogue output (4 mA … 20 mA) and (0 V … 10 V) UC1000-30GM-IUR2-K-V15
2 switch outputs pnp, N.O./N.C. UC1000-30GM-E6R2-K-V15
Series -30GM-
with two switch outputs
or analogue output
temperature compensated
remote M30 Sensor head
TEACH-IN of evaluation limits and outputs functions
(falling/rising slope). During normal operation the
TEACH-IN connector has to be set in position T
(temperature compensation)!
TEACH-IN of the switching points and output functions
(N.O./N.C.). During normal operation the TEACH-IN
connector has to be set in position T
(temperature compensation)!
TEACH-IN of evaluation limits and outputs functions
(falling/rising slope). During normal operation the
TEACH-IN connector has to be set in position T
(temperature compensation)!
TEACH-IN of the switching points and output functions
(N.O./N.C.). During normal operation the TEACH-IN
connector has to be set in position T (temperature
compensation)!