Datasheet

Programming Device
UB-PROG2 + UB-PROG3
■ For sensors
UB500/2000/4000/6000/-30GM-E0/E2-V15
■ Easy TEACH-IN of the switching points
A1/A2 or measurement window
■ Easy TEACH-IN of the output function:
■■ window operation, normally-open/normally-closed function
■■ one switch point, normally-open/normally-closed function
■■ monitoring of the detection range
RS 232 Interface
UC-F43-R2
■ For setting and parameter assignment of
sensor types UC300-F43-2KIR2-V17 and
UC2000-F43-2KIR2-V17 by means of
Ultra 2001
■ Simple interface connection in the
sensor cable and connection of the Sub-D
connector with the PC serial interface.
Extension cable
UC-30GM-PROG
The extension cable enables the TEACH-IN of
ultrasonic sensors of the type UC…-30GM–… and
LUC… even in installation locations that are difficult to
access. Here, the sensor end of the extension cable
is connected with the plug socket on the sensor. Sensor
programming can be carried out on the other end of the
cable using the temperature plug connector.
Ultrasonic Sensors
Accessories
26
■ Programmable characteristic
■ 2 limits values can be set
■ Current/voltage input
■ 2 relay outputs
Technical data DA5-IU-2K-V DA5-IU-2K-C
Operating voltage 10 V DC … 30 V DC 90 V AC … 260 V AC 90 V AC … 260 V AC
Display 6 digit display, red 7-segment LED, 5 digit display, red 7-segment-LED
8 mm 14.2 mm, 2 LED for relais
Sensor supply – 24 V DC, 100 mA –
2 Relay outputs – 2 x 250 V AC/300 V DC, 3 A
Housing 48 x 24 x 65 mm (w x h x d) 96 x 48 x 75 mm (w x h x d)
Method of connection 7-pin connector with screw terminals 8-pin and 11-pin connector with plug-in screw terminals
max. 0.34 mm
2
… 1.5 mm
2
core cross-section max. 0.25 mm
2
… 2.5 mm
2
core cross-section
max. 0.14 mm
2
… 1.5 mm
2
core cross-section
Protection class Front: IP65
Digital display
DA5-IU-C
Digital display
DA5-IU-2K-V
DA5-IU-2K-C