Datasheet

Industrial Doors Series 29
Zone Scanners
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone [phone] • FAX [phone] • E-Mail: [e-mail]
®
PEPPERL+FUCHS
36
Specifications
SENSING MODE
SENSING RANGE
SENSITIVITY ADJUSTMENT
THRESHOLD
SENSING RANGE
REFLECTOR DISTANCE
POLARIZED FILTER
OPERATING MODE
MODEL NUMBER(S)
ELECTRICAL
CONTACT RATING
SUPPLY VOLTAGE
VOLTAGE RIPPLE
LED(s)
CURRENT CONSUMPTION
POWER CONSUMPTION
RESPONSE TIME
SWITCHING FREQUENCY
PROTECTION (IEC)
LIGHT SPOT DIAMETER
LIGHT BEAM ANGLE
LIGHT SOURCE
AMBIENT LIGHT RESISTANCE
TEMPERATURE WORKING
RANGE
STORAGE
HOUSING MATERIAL
LENS
WEIGHT
STANDARDS
APPROVALS
General Purpose
LISTED
General Purpose
CERTIFIED
ELECTRICAL CONNECTION
0-12m
No
14m
(with reflector H85)
40mm-12m
(with reflector FE-RR1)
Yes
Dark on
RLK29-55/59/116
1 SPDT relay
—
30VDC/2A
230VAC/2A
24-230VAC/24-230VDC
10%
Yes (1)
≤8.5mA
0.2W@24VDC
1.8W@230VAC/3VA
≤50ms
7Hz
IP67
≈35mm at a range of 12m
±1º
Visible red LED 640nm
≤90,000 lux
-4ºF to +140ºF
-22ºF to +158ºF
Plastic ABS
Plastic
3.6oz
EN60947-5-2
Yes
Yes
Spring-loaded
terminal
connection
0-12m
No
14m
(with reflector H85)
40mm-12m
(with reflector FE-RR1)
Yes
Light on
RLK29-55/25/116
1 SPDT relay
—
30VDC/2A
230VAC/2A
24-230VAC/24-230VDC
10%
Yes (1)
≤8.5mA
0.2W@24VDC
1.8W@230VAC/3VA
≤50ms
7Hz
IP67
≈35mm at a range of 12m
±1º
Visible red LED 640nm
≤90,000 lux
-4ºF to +140ºF
-22ºF to +158ºF
Plastic ABS
Plastic
3.6oz
EN60947-5-2
Yes
Yes
Spring-loaded
terminal
connection
OUTPUT:
Wiring Diagrams
Sensing Characteristics
Terminal Connection
AC/DC
Gray
Gray
Blue
Blue
Orange
Orange
Gray
Gray
RLK29
Relay Common
Relay Common
N.O. Relay Output
N.C. Relay Output
L1(+)
L1(+)
L2( – )
L2( – )
1
10
3
100
0.03 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Distance X [M]
RLK29-55
x
Excess Gain
Excess Gain vs. Sensing Range
H85
Reflectors
FE-RR1
H60
H160
H180
2xH180
0
0.03 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
20
40
60
80
100
120
140
160
180
200
220
x
y
Distance X [M]
Movement Characteristics RLK29-55
Offset Y [mm]
H85
Reflectors
FE-RR1
H60
H160
H180
Retro-reflective Mode
Mounting and Alignment
Series 29 photoelectric sensors operate in
retro-reflective mode, meaning that the
sensor's lens is mounted facing a corner-
cube style reflector. To optimize sensor
performance, the reflector should be
within the specified operating range of the
sensor and at the center of the light spot.
The alignment can be fine-tuned by
covering the mounted reflector and
holding another reflector on the outer
edge of the light beam to see where the
beam is actually centered. The LED on
the sensor can be used as an alignment
aid, as it illuminates when the reflector is
visible to the sensor.