Datasheet

Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany [phone] • USA [phone] • Singapore [phone] • Internet http://www.pepperl-fuchs.com
Ind. angular measuring system PMI360DV-F130-3E2-V15
3
Release date: 2012-06-12 11:08 Date of issue: 2012-06-12 215314_eng.xml
A Drive shaft
B Insulation ring made from non-conductive material
C Separate actuator (L ≥23 mm)
D Sensitive surface on the sensors (black, cylindrical inner surface)
E Sensor
Actuator (C) can be placed on the insulating ring made from non-conductive material (B) or inserted
in this ring.
Dimension
t2 mm
w7.5 mm
L ≥ 23mm
d1 Depending on the drive shaft material
S235JR+AR (previously St37-2): max. 19 mm
Stainless steel 1.4435 / AISI 316L (V4A): max. 21 mm
Stainless steel 1.4305 / AISI 303 (V2A): max. 23 mm
d2 Select so that the distance between the edges of the actuator and the sensitive
surface on the sensor is 1 ... 2 mm.
d3 41.5 mm
Actuator material Mild steel such as S235JR+AR (previously St37-2)