Datasheet

Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
1
Inductive positioning system PMI14V-F112-2EP-IO-V31
Release date: 2013-12-11 15:40 Date of issue: 2013-12-11 247164_eng.xml
Technical data
General specifications
Installation flush
Object distance max. 2.5 mm
Adjustment range 0 ... 14 mm
Nominal ratings
Operating voltage U
B
10 ... 30 V
Reverse polarity protection reverse polarity protected
Linearity error ± 0.3 mm
Repeat accuracy ± 0.05 mm
Resolution 33 µm
Temperature drift ± 0.5 mm
No-load supply current I
0
≤ 20 mA
Operating voltage indicator LED green
Interface
Interface type IO-Link
Mode COM 2 (38.4 kBaud)
Value range 0000h ... 7000h
Switching output
Output type 2 Push-pull (4 in 1) outputs , short-circuit protected , reverse
polarity protected , overvoltage protected , programmable
Operating current I
L
≤ 100 mA
Switching hysteresis 3-step, adjustable 0.2 m ... 0.8 mm
Voltage drop ≤ 3 V
Short-circuit protection pulsing
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type M8 x 1 connector, 4-pin
Housing material PA 66
Protection degree IP67
Material
Target Steel ST37 / 1.0037
Note The data relating to accuracy only apply to a distance to the
object to be detected of 1 ... 2.5 mm.
Compliance with standards and
directives
Standard conformity
Standards EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approval cULus Listed, General Purpose, Class 2 Power Source
CCC approval CCC approval / marking not required for products rated
≤36 V
Dimensions
35
2 x ø 4.3
25
M8 x 1
20
30.5
35
15
LED
25
41
14
Model Number
PMI14V-F112-2EP-IO-V31
Features
• Parameterization and diagnosis
via IO-Link
• 2 configurable switching frames