Datasheet

Photoelectric
Basic Series 18mm Diameter Style
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone [phone] • FAX [phone] • E-Mail: [e-mail]
®
PEPPERL+FUCHS
620
Diffused and Thru-Beam Mode Fiber Optic Sensors
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
MODEL NUMBER(S)
-E4
-E5
LOAD CURRENT
VOLTAGE DROP
SHORT CIRCUIT AND
OVERLOAD PROTECTION
REVERSE POLARITY
PROTECTION
SUPPLY VOLTAGE
VOLTAGE RIPPLE
LED(s)
CURRENT CONSUMPTION
OPERATING MODE
RESPONSE TIME
READINESS DELAY
HYSTERESIS
SWITCHING FREQUENCY
ELECTROMAGNETIC
COMPATIBILITY COMPLIANCE
PROTECTION (IEC)
LIGHT SOURCE
AMBIENT LIGHT RESISTANCE
TEMPERATURE WORKING
RANGE
STORAGE
HOUSING MATERIAL
LENS
WEIGHT
APPROVALS
General Purpose
LISTED
General Purpose
CERTIFIED
ELECTRICAL CONNECTION
ADDITIONAL DATA
Determined by cable*
Yes
OBT200L-18GM70-E4
OBT200L-18GM70-E5
NPN
PNP
100mA max.
≤2.5VDC
Yes
Yes
10-30VDC
10%
Yes (1)
≤20mA
Light on/dark on
≤1.5ms
≤50ms
≤10%
300Hz
NEMA ICS5-2000
See page 6
IP67
Infrared LED 940nm
≤10,000 lux
-13ºF to +131ºF
-40ºF to +158ºF
Nickel-plated brass
PMMA
6.9oz
Yes
Yes
2-meter cable,
PVC covered
3-conductor, #22AWG
OUTPUT: Transistor,
Normally Open or
Normally Closed
Determined by cable*
Yes
OBT200L-18GM70-E4-V1
OBT200L-18GM70-E5-V1
NPN
PNP
100mA max.
≤2.5VDC
Yes
Yes
10-30VDC
10%
Yes (1)
≤20mA
Light on/dark on
≤1.5ms
≤50ms
≤10%
300Hz
NEMA ICS5-2000
See page 6
IP67
Infrared LED 940nm
≤10,000 lux
-13ºF to +131ºF
-40ºF to +158ºF
Nickel-plated brass
PMMA
2.8oz
Yes
Yes
Quick
disconnect
type V1
See pages 621-624
*See pages 735-764 for
glass fiber optic lengths
and specifications.
Attaching Fiber Optic Cable
1. Position mounting plate on sensor so that
alignment tabs fit into lens holes.
2. With fiber optic cable pulled through metal capnut
opening, position cable on mounting plate.
3. Hand tighten metal capnut on sensor.