Datasheet

Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Thru-beam sensor OBE2000-R2-SE2-0,2M-V31
4
Release date: 2017-07-17 13:41 Date of issue: 2017-07-17 262342_eng.xml
The thru-beam sensor enables the switching points to be taught in for optimum adaptation to specific applications. This eliminates the need for
additional components such as apertures.
Essentially, all Teach-in methods can be used in both "High Precision" and "High Power" operating modes.
The sensitivity of the thru-beam sensor can be adjusted using three Teach-in methods:
Position Teach
When using this Teach-in method, the following settings are made on the thru-beam sensor:
• The gain is set to an optimum value
• The signal threshold is set to a minimum
Te a ch- I n M eth o d s
X
100
10
1
0.1
0 50 100 150 200 250 300 350
2
Distance X [mm]
Relative received light strength High Precision Modus
Stability control
350
300
250
200
150
100
50
0
0 0.5 1.0 1.5 2.0 2.5 3.0
X
Distance in m
Light spot diameter Long Range Modus
Diameter in mm
6
5
4
3
2
1
0
0 0.05 0.10 0.15 0.20 0.25 0.30
X
Distance in m
Light spot diameter High Precision Modus
Diameter in mm