Datasheet

Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Thru-beam sensor OBE12M-R100-S2EP-IO
2
Release date: 2018-06-08 14:04 Date of issue: 2018-09-19 280997_eng.xml
Technical data
System components
Emitter OBE12M-R100-S-IO
Receiver OBE12M-R100-2EP-IO
General specifications
Effective detection range 0 ... 12 m
Threshold detection range 15 m
Light source LED
Light type modulated visible red light
LED risk group labelling exempt group
Diameter of the light spot approx. 65 mm at a distance of 1 m
Angle of divergence 3.7 °
Ambient light limit EN 60947-5-2 : 30000 Lux
Functional safety related parameters
MTTF
d
462 a
Mission Time (T
M
) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicator Yellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Control elements Receiver: light/dark switch
Control elements Receiver: sensitivity adjustment
Parameterization indicator IO link communication: green LED goes out briefly (1 Hz)
Electrical specifications
Operating voltage U
B
10 ... 30 V DC
Ripple max. 10 %
No-load supply current I
0
Emitter: ≤ 14 mA
Receiver: ≤ 13 mA at 24 V supply voltage
Protection class III
Interface
Interface type IO-Link ( via C/Q = pin 4 )
Transfer rate COM 2 (38.4 kBaud)
IO-Link Revision 1.1
Min. cycle time 2.3 ms
Process data witdh Emitter:
Process data output: 2 Bit
Receiver:
Process data input: 2 Bit
Process data output: 2 Bit
SIO mode support yes
Device ID Emitter: 0x110401 (1115137)
Receiver: 0x110301 (1114881)
Compatible master port type A
Input
Test input emitter deactivation at +U
B
Output
Switching type The switching type of the sensor is adjustable. The default
setting is:
C/Q - BK: NPN normally open / dark-on, PNP normally closed /
light-on, IO-Link
/Q - WH: NPN normally closed / light-on, PNP normally open /
dark-on
Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse
polarity protected, overvoltage protected
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop U
d
≤ 1.5 V DC
Switching frequency f 1000 Hz
Response time 0.5 ms
Conformity
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Ambient conditions
Ambient temperature -40 ... 60 °C (-40 ... 140 °F) , fixed cable
-25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for
conveyor chains
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width 11 mm
Housing height 37.1 mm
Housing depth 21.5 mm
Other suitable accessories can be found at
www.pepperl-fuchs.com
Accessories
IO-Link-Master02-USB
IO-Link master, supply via USB port or
separate power supply, LED indicators,
M12 plug for sensor connection
OMH-R10X-01
Mounting bracket
OMH-R10X-02
Mounting bracket
OMH-R10X-04
Mounting bracket
OMH-R10X-10
Mounting bracket
OMH-ML100-03
Mounting aid for round steel ø 12 mm or
sheet 1.5 mm ... 3 mm
OMH-ML100-031
Mounting aid for round steel
ø 10 ... 14 mm or sheet 1 mm ... 5 mm