Datasheet

ManualsBrandsPepperl+Fuchs ManualsInductive SensorsInductive Sensor 5mm NAMUR Break Contact

PEPPERL+FUCHS GmbH www.pepperl-fuchs.com

Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany

Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com

Inductive proximity switches

NCB5-18GM40-N0

2006-01-26 – 106295_ENG.xml

Comfort series

5 mm embeddable

Usable up to SIL2 acc. to

IEC 61508

LED

M18x1

General specifications

Switching element function NAMUR NC

Rated operating distance s

5 mm

Installation embeddable

Assured operating distance s

0 ... 4.05 mm

Reduction factor r

0.35

Reduction factor r

0.3

Reduction factor r

V2A

0.74

Nominal ratings

Nominal voltage U

8 V

Switching frequency f 0 ... 1000 Hz

Hysteresis H 1 ... 15 typ. 5 %

Reverse polarity protection Protected against reverse polarity

Short-circuit protection yes

Current consumption

Measuring plate not detected ≥ 3 mA

Measuring plate detected ≤ 1 mA

Indication of the switching state all direction LED, yellow

Standard conformity

EMC in accordance with IEC / EN 60947-5-2:2004; NE 21

Standards DIN EN 60947-5-6 (NAMUR)

Ambient conditions

Ambient temperature -25 ... 100 °C (248 ... 373 K)

Storage temperature -40 ... 100 °C (233 ... 373 K)

Mechanical specifications

Connection type 2 m, PVC cable

Core cross-section

0.75 mm

Housing material Stainless steel

Sensing face PBT

Protection degree IP67

General information

Use in the hazardous area see instruction manuals

Category 1G; 2G; 3G; 1D; 3D

Connection type:

1/BN

N / N0

L+

L-

2/BU

0102

Summary of content (7 pages)

PAGE 1
Inductive proximity switches NCB5-18GM40-N0 Comfort series 5 mm embeddable Usable up to SIL2 acc. to IEC 61508 37 40 4 M18x1 24 LED 0102 8V 0 ... 1000 Hz 1 ... 15 typ. 5 % Protected against reverse polarity yes ≥ 3 mA ≤ 1 mA all direction LED, yellow Standard conformity EMC in accordance with Standards IEC / EN 60947-5-2:2004; NE 21 DIN EN 60947-5-6 (NAMUR) Ambient conditions Ambient temperature Storage temperature -25 ... 100 °C (248 ... 373 K) -40 ... 100 °C (233 ...
PAGE 2
NCB5-18GM40-N0 Inductive proximity switches ATEX 1G Instruction Manual electrical apparatus for hazardous areas Device category 1G for use in hazardous areas with gas, vapour and mist Directive conformity 94/9/EG Standard conformity EN 50014:1997; EN 50020:1994; EN 50284:1999 Ignition protection "Intrinsic safety" Use is restricted to the following stated conditions CE symbol Ex-identification EC-Type Examination Certificate Appropriate type ¬ II 1G EEx ia IIC T6 PTB 00 ATEX 2048 X NCB5-18GM...
PAGE 3
NCB5-18GM40-N0 Inductive proximity switches ATEX 2G Instruction Manual electrical apparatus for hazardous areas Device category 2G for use in hazardous areas with gas, vapour and mist Directive conformity 94/9/EG Standard conformity EN 50014:1997, EN 50020:1994 Ignition protection "Intrinsic safety" Use is restricted to the following stated conditions Ex-identification EC-Type Examination Certificate Appropriate type Effective internal capacitance Ci 0102 ¬ II 1G EEx ia IIC T6 PTB 00 ATEX 2048 X N
PAGE 4
NCB5-18GM40-N0 Inductive proximity switches ATEX 3G (nA) Instruction Manual electrical apparatus for hazardous areas Device category 3G (nA) for use in hazardous areas with gas, vapour and mist Directive conformity 94/9/EG Standard conformity EN 50021:2000 Ignition protection category "n" Use is restricted to the following stated conditions CE symbol 0102 Ex-identification ¬ II 3G EEx nA IIC T6 X General The apparatus has to be operated according to the appropriate data in the data sheet and i
PAGE 5
NCB5-18GM40-N0 Inductive proximity switches ATEX 1D Instruction Manual electrical apparatus for hazardous areas Device category 1D for use in hazardous areas with combustible dust Directive conformity 94/9/EG Standard conformity IEC 61241-11:2002: draft; prEN61241-0:2002 type of protection intrinsic safety "iD" Use is restricted to the following stated conditions Ex-identification EC-Type Examination Certificate Appropriate type Effective internal capacitance Ci 0102 ¬ II 1D Ex iaD 20 T 108 °C (38
PAGE 6
NCB5-18GM40-N0 Inductive proximity switches ATEX 3D Instruction Manual electrical apparatus for hazardous areas Device category 3D for use in hazardous areas with non-conducting combustible dust Directive conformity 94/9/EG Standard conformity EN 50281-1-1 Protection via housing Use is restricted to the following stated conditions CE symbol 0102 Ex-identification ¬ II 3D IP67 T 109 °C (382 K) X The Ex-significant identification is on the enclosed adhesive label General The apparatus has to be
PAGE 7
NCB5-18GM40-N0 Inductive proximity switches ATEX 3G (nL) Instruction Manual electrical apparatus for hazardous areas Device category 3G (nL) for use in hazardous areas with gas, vapour and mist Directive conformity 94/9/EG Standard conformity EN 50021:2000 Ignition protection category "n" Use is restricted to the following stated conditions 0102 Ex-identification ¬ II 3G EEx nL IIC T6 X The Ex-significant identification is on the enclosed adhesive label Effective internal capacitance Ci ≤ 95 nF