Datasheet

1
Inductive sensor NCB40-FP-A2-P1
Release date: 2016-09-29 11:38 Date of issue: 2016-10-10 187486_eng.xml
Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
S
Model Number
NCB40-FP-A2-P1
Features
•Comfort series
• 40 mm flush
Technical Data
General specifications
Switching element function PNP NO/NC
Rated operating distance s
n
40 mm
Installation flush
Output polarity DC
Assured operating distance s
a
0 ... 32.4 mm
Reduction factor r
Al
0.25
Reduction factor r
Cu
0.23
Reduction factor r
304
0.85
Nominal ratings
Operating voltage U
B
10 ... 60 V
Switching frequency f 0 ... 80 Hz
Hysteresis H typ. 3 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Volta ge drop U
d
≤ 3 V
Operating current I
L
0 ... 200 mA
Off-state current I
r
0 ... 0.5 mA
No-load supply current I
0
≤ 20 mA
Time delay before availability t
v
≤ 300 ms
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Functional safety related parameters
MTTF
d
630 a
Mission Time (T
M
) 20 a
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross-section
may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-section up to 2.5 mm
2
Minimum core cross-section
without wire end ferrule 0.5 mm
2
, with connector sleeves 0.34 mm
2
Maximum core cross-section
without wire end ferrule 2.5 mm
2
, with connector sleeves 1.5 mm
2
Housing material PBT
Sensing face PBT
Housing base PBT
Degree of protection IP68
Compliance with standards and directives
Standard conformity
Standards
EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval Certified by China Compulsory Certification (CCC)
Dimensions
80
65
65
LEDs
40
11
M20 x 1.5
LEDs
7
ø 5.3
ø 9.5