Datasheet

Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Inductive sensor NBN40-L2-A2-V1-3G-3D
3
Release date: 2018-11-13 10:42 Date of issue: 2018-11-13 130625_eng.xml
Standards EN 60079-0:2012+A11:2013, EN 60079-31:2014
Protection by enclosure "tc" Some of the information in this instruction manual is more specific than the information
provided in the datasheet.
General The corresponding datasheets, declarations of conformity, EC-type examination certificates, certifications, and
control drawings, where applicable (see datasheets), form an integral part of this document. These documents can
be found at www.pepperl-fuchs.com. The maximum surface temperature of the device was determined without a
layer of dust on the apparatus. Some of the information in this instruction manual is more specific than the
information provided in the datasheet.
Special conditions
Maximum permissible ambient temperature T
Umax
dependant of the load current I
L
and the max. operating voltage U
Bmax
Information can be taken from the following list.
at U
Bmax
=30 V, I
L
=200 mA
48 °C (118.4 °F)
at U
Bmax
=30 V, I
L
=100 mA
50 °C (122 °F)
at U
Bmax
=30 V, I
L
=50 mA
51 °C (123.8 °F)
at U
Bmax
=30 V, I
L
=25 mA
52 °C (125.6 °F)
Equipment protection level Dc (tD)
General The apparatus has to be operated according to the appropriate data in the data sheet and in this instruction manual.
The maximum surface temperature has been determined in accordance with method A without a dust layer on the
equipment.
The data stated in the data sheet are restricted by this operating instruction!
The special conditions must be adhered to!
Special conditions
Maximum permissible ambient temperature T
Umax
dependant of the load current I
L
and the max. operating voltage U
Bmax
Information can be taken from the following list.
at U
Bmax
=30 V, I
L
=200 mA
48 °C (118.4 °F)
at U
Bmax
=30 V, I
L
=100 mA
50 °C (122 °F)
at U
Bmax
=30 V, I
L
=50 mA
51 °C (123.8 °F)
at U
Bmax
=30 V, I
L
=25 mA
52 °C (125.6 °F)