Datasheet

1
Release date: 2014-03-27 15:05 Date of issue: 2014-03-27 033552_eng.xml
Mounting aid MH 04-2681F
Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Dimensions
Technical data
Standard conformity
Standards IEC 68-2-6, IEC 68-2-27
Ambient conditions
Shock resistance b < 30 g, T < 11 ms
Vibration resistance f < 55 Hz, a < 1 mm
Mechanical specifications
Material Chrome coated diecast zinc
Mass approx. 270 g
Dimensions 90 mm x 40 mm x 28 mm (with 2-point fixing)
30
ø 5.2 (4x)
27
16.5
20
60
90
40
Model Number
MH 04-2681F
Mounting aid for VariKont, +U1+ and
+U9*
Features
• Suitable for VariKont, +U1+ and +U9*
sensors
• Fixing screws for VariKont included in
delivery
Function
The mounting bracket type 04-2681 simplifies
the adjustment of sensors of the model line
VariKont
®
and the series +U1+ and +U9*
according to DIN 43694, EN 50025 or
EN 50037.
Fitting is simple using the well-tried and
tested C section rail (e.g. NIEDAX GmbH)
according to EN 50024 (15 mm x 30 mm x
1.5 mm). For existing installations, the mount-
ing bracket is suitable for the C section rail
according to the expiring DIN 43662
(15mmx 30mmx 2mm).
Instead of the C section rail, two-point fitting is
possible. The respective drill holes are acces-
sible via the middle guiding slot. Screws
M5 x 16 mm can be used.
Large adjusting ranges in x and y direction
and the 360° turning range simplify and
reduce the mounting and adjustment work.
The selected position can be adjusted by
tightening the sensor mounting screws
(included in the delivery package).