Datasheet

Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Retroreflective sensor with polarization filter for clear object GLV18-55-G/73/120
2
Release date: 2016-07-20 11:28 Date of issue: 2016-07-20 214916_eng.xml
Technical data
General specifications
Effective detection range 0 ... 2.5 m in glass mode;
0 ... 5 m in normal mode
Reflector distance 0 ... 2.5 m in glass mode;
0 ... 5 m in normal mode
Threshold detection range 6.5 m
Reference target reflector C110-2
Light source LED
Light type modulated visible red light , 640 nm
Polarization filter yes
Diameter of the light spot approx. 370 mm at 6.5 m ; 50 mm at 1 m
Angle of divergence approx. 2 °
Optical face frontal
Ambient light limit 30000 Lux
Functional safety related parameters
MTTF
d
1260 a
Mission Time (T
M
) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green, statically lit Power on,
blinking with 2 Hz or 4 Hz in Teach-In mode
Function indicator LED yellow: In retro-reflective mode: Lights up when light beam
is free; flashing if signal is short of function reserve, off when
light beam is interrupted In glass-mode: Lights up when light
beam is free; flashing if further compensation is impossible; off
when light beam is interrupted
Control elements potentiometer for Teach-In and Mode selection
Contrast detection levels 18 % - clear glass bottles
Electrical specifications
Operating voltage U
B
10 ... 30 V DC
No-load supply current I
0
< 15 mA
Output
Switching type light/dark on
Signal output 2 PNP, complementary, short-circuit protected, open collectors
Switching voltage max. 30 V DC
Switching current max. 100 mA
Voltage drop U
d
≤ 1.5 V DC
Switching frequency f 1 kHz
Response time ≤ 0.5 ms
Ambient conditions
Ambient temperature -25 ... 60 °C (-13 ... 140 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection IP67
Connection 4-pin, M12 x 1 connector
Material
Housing PC
Optical face PMMA
Connector plastic
Mass approx. 10 g
Compliance with standards and directi-
ves
Standard conformity
Product standard EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
Protection class II, rated insulation voltage ≤ 250 V AC with pollution degree 1-
2 according to IEC 60664-1
UL approval cULus Listed, Class 2 Power Source
CCC approval CCC approval / marking not required for products rated ≤36 V
Other suitable accessories can be found at
www.pepperl-fuchs.com
Accessories
CPZ18B03
Mounting Bracket with swivel nut
BF 18
Mounting flange, 18 mm
BF 18-F
Mounting flange with dead stop, 18 mm
BF 5-30
Universal mounting bracket for cylindrical
sensors with a diameter of 5 ... 30 mm
REF-C110-2
Reflector, round ø 84 mm, central moun-
ting hole
REF-H60
Reflector, rectangular 40.5 mm x 60 mm,
mounting holes
REF-H85
Reflector, rectangular 84.5 mm x
84.5 mm, mounting holes
REF-H50
Reflector, rectangular 51 mm x 61 mm,
mounting holes, fixing strap
ORR50
Reflector, rectangular 50.9 mm x 50.9
mm, mounting holes, fixing strap
V1-G-2M-PUR
Female cordset, M12, 4-pin, PUR cable
V1-W-2M-PUR
Female cordset, M12, 4-pin, PUR cable