Datasheet

1
Release date: 2018-03-22 11:55 Date of issue: 2018-04-03 107461_eng.xml
Mounting flange BF 30-F
Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Dimensions
Technical data
General specifications
Inside diameter 30 mm
Ambient conditions
Ambient temperature -25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Material black polycarbonate (PC)
Construction type For sensors with 45° chamfer
Note
Installation
• Position the mounting bracket on the desired place
• Mark the position of drilling holes in the mid section of the oblong holes
• Drill the mounting holes through the surface
• Screw on the mounting bracket slightly via the lateral oblong holes by using suitable M4
screws
• Stick the sensor through the mounting bracket and fix the sensor by the lid on the upper
part of the bracket
• Adjust the bracket and make the final positioning
• Fix the mounting bracket finally with the screws
Dead stop
4.2
7.8
4.1
17
4
14
13
35
35
29
41
33
24
17
ø 30
Model Number
BF 30-F
Plastic mounting adapter, 30 mm
Features
• For mounting cylindrical sensors with
metal thread
• Secure mounting of the sensor via a
snap lock
• Installation position defined by fixed
stop
• Adjustable via slot mounting