Data Sheet

Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Background suppression sensor RLK28-8-H-2000-IR-Z/31/116
2
Release date: 2018-03-26 09:36 Date of issue: 2018-03-26 134133_eng.xml
Technical data
General specifications
Detection range 20 ... 2000 mm
Detection range min. 20 ... 200 mm
Detection range max. 20 ... 2000 mm
Adjustment range 200 ... 2000 mm
Background suppression max. + 10 % of the upper limit of the detection range
Light source IRED
Light type modulated infrared light , 880 nm
Black/White difference (6 %/90 %) < 40 %
Diameter of the light spot approx. 70 mm at a distance of 2000 mm
Angle of divergence transmitter 2°
receiver 2°
Ambient light limit 50000 Lux
Functional safety related parameters
MTTF
d
620 a
Mission Time (T
M
) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green
Function indicator 2 LEDs yellow
ON: object inside the scanning range
OFF: object outside the scanning range
Control elements Sensing range adjuster , Light-on/dark-on changeover switch
Electrical specifications
Operating voltage U
B
12 ... 240 V AC/DC
Power consumption P
0
≤ 3.5 VA
Output
Switching type light/dark on, switchable (selectable, light/dark switching is only
activated if the receiver has 'dark on' selected.)
Signal output Relay, 1 alternator
Switching voltage max. 250 V AC/DC
Switching current max. 2 A
Switching power DC: max. 50 W AC: max. 500 VA
Switching frequency f 25 Hz
Response time 20 ms
Timer function ON delay (GAN), OFF delay (GAB), one shot (IAB), ON delay-
one shot (GAN-IAB), ON delay-OFF delay (GAN-GAB),
programmable
adjustment interval 0.1 ... 10 s
Conformity
Product standard EN 60947-5-2
Ambient conditions
Ambient temperature -40 ... 60 °C (-40 ... 140 °F)
Storage temperature -40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Housing width 25.8 mm
Housing height 88 mm
Housing depth 65.5 mm
Degree of protection IP67
Connection terminal compartment with 8 spring-loaded terminals for wire
cross section 0.5 ... 1.5 mm
2
, insulation stripping 7.5 ... 8.5 mm,
M16 x 1.5 cable gland
Material
Housing Plastic ABS
Optical face Plastic pane
Mass 112 g
Approvals and certificates
EAC conformity TR CU 020/2011
TR CU 004/2011
Protection class II, rated insulation voltage ≤ 250 V AC with pollution degree 1-
2 according to IEC 60664-1 Output circuit insulated from
control circuit in accordance with IEC 61140.
Caution!
The protection class 2 is only valid when the terminal
compartment is closed.
UL approval E87056 , cULus Listed Caution: This equipment is
considered as open-type equipment. It must be mounted
within an enclosure, that is suitably designed for protection
against internal fire and personal injury resulting from
accessibility to live parts according UL 508.
CCC approval Certified by China Compulsory Certification (CCC)
Other suitable accessories can be found at
www.pepperl-fuchs.com
Accessories
OMH-05
Mounting aid for round steel ø 12 mm or
sheet 1.5 mm ... 3 mm
OMH-07
Mounting aid for round steel ø 12 mm or
sheet 1.5 mm ... 3 mm
OMH-21
Mounting bracket
OMH-22
Mounting bracket
OMH-MLV11-K
dove tail mounting clamp
OMH-RLK29
Mounting bracket
OMH-RLK29-HW
Mounting bracket for rear wall mounting
OMH-RL28-C
Weld slag cover model