User Manual

* FOR SAFETY PURPOSES, THE TRAIN’S FUNCTIONS WILL STOP WHEN IT’S UPSIDE DOWN.
ON /OFF/TRY ME
Switch
Remove the depleted batteries and insert
the new ones with the correct polarity
indicated inside the compartment.
Replace cover and tighten screws.
4
3
0
ON
OFF
Try Me
Battery Compartment
2. Train
1. Control Wand
3. How to Play
Use a Phillips/cross-head screwdriver (not included) to loosen screws in battery
compartment cover (screw remains attached to cover). Remove cover and discard
depleted batteries. Replace with 4 x 1.5V AAA (LR03) size batteries. Follow the (+) and (-)
markings in the battery compartment and on the batteries to ensure proper battery
placement. Replace cover and tighten screws.
Battery Compartment
Use a Phillips/cross-head screwdriver (not included) to loosen screws in battery
compartment cover (screws will remain attached to cover). Remove cover and discard
depleted batteries. Replace with 2 x 1.5V AAA (LR03) size batteries. Follow the (+) and (-)
markings in the battery compartment and on the batteries to ensure proper battery
placement. Replace cover and tighten screws.
- Turn on the train. The on/off switch is located on the bottom
of the toy.
- Turn on the control wand. The on/off switch is located on the
back of the toy.
- Connect the floats to the train in the desired order.
- Press and hold the music note button on the control wand.
The train will move forward and follow the control wand’s
movement until the control wand’s music note button is released.
While in motion the train and floats will have the following functions:
Smoke Pops Up and Down
PLAY SOUNDS
* FOR SAFETY PURPOSES, THE TRAIN’S FUNCTIONS WILL STOP WHEN IT’S UPSIDE DOWN.
TRAIN FOLLOWS CONTROL
WAND’S MOVEMENT
Try Me/
Music Note Button
ON /OFF
Switch
Remove the depleted batteries and insert
the new ones with the correct polarity indicated
inside the compartment.
Replace cover and tighten screws.
Bottom View
Bottom View
2
Important: This toy works best if you have a clear path between the control wand and
the train. The maximum range of the control wand is 4 feet.
NOTES:
• On “ON” mode,when the toy is not being used, the Train will switch to sleep after 3 minutes.
To wake up the Train, press the
Try Me/Music Note Button or switch the ON-OFF switch.
• lf the train starts to lose power, it may experience loss of function and performance.
If this happens, simply replace batteries in the train or the wand controller.
• The train is operated by infrared and will not work properly in bright sunlight.
• To preserve battery life, turn off the train and the control wand after playing.
• Train and wand control will not operate properly if it is separated by a physical
structures, such a walls, furniture, tables etc.
• Train will best work on smooth, clean surfaces.
B
C
D
Flower float
Dino float
Unicorn float
Pretend smoke raises and lowers while in motion, music and phrases will be played each
time the control wand’s button is pressed.
3
A
Train
Seat swings side to side.
Unicorn spins.
Dino rocks back and forth.
ON
OFF
• Float is not intended to be used for big characters (only small characters).