User Guide

http://www.peplink.com
65
Copyright @ 2017 Peplink
IP Settings
IP Address &
Subnet Mask
Enter the Peplink Balance’s IP address and subnet mask values to be used on the LAN. To
enable multiple VLANs, press the button on the top right-hand corner.
Network Settings
Name
Enter a name for the LAN.
VLAN ID
Enter a VLAN ID for your LAN.
Inter-VLAN
routing
Check this box to enable routing between virtual LANs.
Captive Portal
Check this box to turn on captive portals.
Layer 2 PepVPN Bridging
A
PepVPN
Profiles to
Bridge
A
The remote network of the selected PepVPN profiles will be bridged with this local LAN,
creating a Layer 2 PepVPN. They will be connected and operate like a single LAN, and any
broadcast or multicast packets will be sent over the VPN.
Remote
Enable this option if you want to block network traffic between remote networks. This will
not affect the connectivity between them and this local LAN.