User Guide

http://www.peplink.com
132
Copyright @ 2017 Peplink
Listen On
This setting is for specifying the WAN IP addresses where the PPTP server of the router
should listen on.
User Accounts
This setting allows you to define the PPTP User Accounts. Click Add to input username and
password to create an account. After adding the user accounts, you can click on a
username to edit the account password. Click the button X to delete the account in its
corresponding row.
Click the button to switch to enters user accounts by pasting the information in.CSV
format.
12.15 Misc. Settings
12.15.1 High Availability
The Peplink Balance supports high availability (HA) configurations via an open standard virtual
router redundancy protocol (VRRP, RFC 3768).
In an HA configuration, two same-model Peplink Balance units provide redundancy and failover
in a master-slave arrangement. In the event that the master unit is down, the slave unit
becomes active.
High availability will be disabled automatically where there is a drop-in connection configured on
a LAN bypass port.
The following diagram illustrates an HA configuration with two Peplink Balance units and two
Internet connections:
In the diagram, the WAN ports of each Peplink Balance unit connect to the router and to the
modem. Both Peplink Balance units connect to the same LAN switch via a LAN port.