Operation Manual

113
3
Taking Pictures
Saving the Settings (Memory)
The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to O (On)
(the settings are saved when the camera is turned off), while for others
you can choose O or P (Off) (to choose whether the settings are saved
or not when the camera is turned off). The items which can be set to O
or P in the Memory function are shown in the table below. (For items
which are not listed here, the selected settings are always saved when
the camera is turned off.)
If you select O, the settings will be saved in the status they are in
immediately before the camera is turned off. If you select P, the settings
will be reset to the defaults when the camera is turned off. The table
below also shows whether the Memory default setting for each item is O
or P.
Item Description
Default
Setting
Page
Flash Mode The flash mode set with the four-way controller (4) O p.88
Drive Mode The drive mode set with the four-way controller (2) P
p.84
p.85
Focus Mode The focus mode set with the four-way controller (5) P p.89
Zoom Position The zoom position set with the zoom button P p.73
MF Position
The manual focus position set with the four-way
controller (23)
P p.90
White Balance
The [White Balance] setting on the [ A Rec. Mode] menu P p.96
Sensitivity The [Sensitivity] setting on the [A Rec. Mode] menu P p.99
EV
Compensation
The [EV Compensation] setting on the
[A Rec. Mode] menu
P p.94
AE Metering
The [AE Metering] setting on the [A Rec. Mode]
menu
P p.98
Digital Zoom
The [Digital Zoom] setting on the [ A Rec. Mode] menu O p.74
Face Detection
The [Face Detection] setting on the [A Rec. Mode]
menu
P p.69
DISPLAY
The information display mode set with the
4/W button
P p.20
File No.
If a new SD Memory Card is inserted when set to O
(On), file numbers are assigned sequentially
O —