Operation Manual

90
3
Taking Pictures
3 Use the four-way controller (45)
to select the EV value.
To brighten, select a positive (+) value. To
darken, select a negative (–) value.
You can choose the EV setting in the range
of –2.0 EV to +2.0 EV in 1/3 EV steps.
4 Press the 3 button.
The camera returns to capture status.
You can select the sensitivity to suit the brightness of the surroundings.
1 Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2 Use the four-way controller (23) to select [Sensitivity].
3 Press the four-way controller (5).
A pull-down menu appears.
The EV compensation function cannot be used in 9 (Green) or b
(Auto Picture) mode.
Saving the EV Compensation value setting 1p.97
Setting the Sensitivity
Auto The sensitivity is automatically adjusted by the camera. (Sensitivity 100 - 800)
100
The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.200
400
800
1600
Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected by
noise.
3200
6400
10 M
Rec. Mode
MENU
Exit
1/2
Recorded Pixels
Focusing Area
Sensitivity
Movie
EV Compensation
0.0
Auto
Digital Zoom
e_kb496.book Page 90 Wednesday, July 15, 2009 10:23 AM