Operation Manual

172
7
Connecting to a Computer
Connecting to a Macintosh
Connect your camera to the Macintosh using the provided USB cable
(I-USB98).
1 Turn your Macintosh on.
2 Turn your camera off.
3 Connect your camera to the Macintosh using the USB
cable.
Connect the terminal of the USB cable with pointing toward the 4
on the PC/AV terminal on the bottom of the camera.
4 Turn your camera on.
The camera is recognized as [NO_NAME] on the
desktop.
Connecting the Camera and Macintosh
• If the SD Memory Card has a volume label, the volume label name
appears instead of [NO_NAME]. A new unformatted SD Memory Card
may show the manufacturer name or model number.
• The power switch blinks while the camera is connected to a Macintosh.
e_kb496.book Page 172 Wednesday, July 15, 2009 10:23 AM