Operation Manual

151
6
Settings
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to select the time until the camera
enters power saving mode.
Choose from [2min.], [1min.], [30sec.],
[15sec.], [5sec.] or [Off.].
5 Press the 4 button.
The setting is saved.
You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1 Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2 Use the four-way controller (23) to select [Auto Power
Off].
3 Press the four-way controller (5).
A pull-down menu appears.
• Power Saving does not function in the following situations:
- in the playback mode
- while recording a movie
- while the camera is connected to a computer
- while a menu is being displayed
• When no operation is performed after the camera is turned on, Power
Saving is activated only after 15 seconds elapse even if [5sec.] is set.
Setting Auto Power Off
S ettin g
Power Savi n g
Auto Power O ff
Vid e o O ut
B r ightn e ss Lev el
2 / 3
MENU
Cancel
C a n c e l
Cancel
OK
OK
OK
OK
2mi n .
O ff
5se c .
30se c .
1mi n .
15se c .
Delete a ll
R e s et
e_kb496.book Page 151 Wednesday, July 15, 2009 10:23 AM