Operation Manual

150
6
Settings
You can adjust the brightness of the display.
1 Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2 Use the four-way controller (23) to select [Brightness
Level].
3 Use the four-way controller (45)
to adjust the brightness.
F Dark
G Normal
H Bright
4 Press the 3 button.
The camera returns to A mode or Q mode.
The display appears with the set brightness.
You can save battery power by setting the display to dim automatically
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness by pressing any of the buttons.
1 Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2 Use the four-way controller (23) to select [Power
Saving].
Adjusting the Brightness of the Display
Using the Power Saving Function
S ettin g
Power Savi n g
Auto Power O ff
3mi n .
5se c .
Vid e o O ut
B r ightn e ss Lev el
2 / 3
MENU
Cancel
C a n c e l
Exit
NTSC
Delete a ll
R e s et
e_kb496.book Page 150 Wednesday, July 15, 2009 10:23 AM