Operation Manual

149
6
Settings
When you connect the camera to AV equipment, choose the appropriate
video output format (NTSC or PAL) for taking and playing back images.
1 Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2 Use the four-way controller (23) to select [Video Out].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to select video output format.
Choose a video output format to match the
output format of the AV equipment.
5 Press the 4 button.
The setting is saved.
Changing the Video Output Format
Depending on the country or region, images may fail to be played back
if the video output format is set different from the one in use there. If this
happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.118
Video output format of each city 1p.188
S ettin g
Power Savi n g
R e s et
Auto Power O ff
3mi n .
5se c .
Vid e o O ut
B r ightn e ss Lev el
2 / 3
MENU
Cancel
C a n c e l
Cancel
OK
OK
OK
OK
NTSC
PAL
Delete a ll
e_kb496.book Page 149 Wednesday, July 15, 2009 10:23 AM