Operation Manual

132
5
Editing and Printing Images
Frames downloaded from a PENTAX website or other source can be
used for adding a frame to pictures.
You can copy images from the built-in memory to the SD Memory Card
and vice versa. This function can only be selected when an SD Memory
Card has been inserted in the camera.
1 Press the four-way controller (3) in Q mode.
The Playback Mode Palette appears.
2 Use the four-way controller
(2345) to select p (Image
Copy).
3 Press the 4 button.
The copying method selection screen appears.
To Use a New Frame
• Extract the downloaded frame and copy it to the FRAME folder in the
built-in memory or the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted
with this camera.
• For more information on downloading, refer to the PENTAX website.
Copying Images
Make sure that the camera is turned off before inserting or removing the
SD Memory Card.
OK
O K
OK
MENU
C a n c e l
Cancel
To copy images between
the built-in m e mory and an
S D Memory Card
I m a g e C o p y
I mage Copy
e_kb496.book Page 132 Wednesday, July 15, 2009 10:23 AM