Quick Start Guide

6
• The display may appear black at high temperatures, but will return to
normal at normal temperatures.
• The display may respond more slowly at low temperatures. This is due
to liquid crystal properties, and is not a malfunction.
• Sudden temperature changes will cause condensation on the inside
and outside of the camera. Place the camera in your bag or a plastic
bag, and remove it after the temperatures of the camera and
surroundings are equalized.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or
salt. These could cause the camera to breakdown. Wipe the camera to
dry off any rain or water drops.
• Do not press the display with excessive force. This could cause it to
break or malfunction.
• Be careful not to overtighten the tripod screw when using a tripod.
• Do not clean the camera with organic solvents such as thinner, alcohol
or benzine.
• Use a lens brush to remove dust accumulated on the lens. Never use
a spray blower for cleaning as it may damage the lens.
• Do not store the camera with preservatives or chemicals. Storage in
high temperatures and high humidity can cause mold to grow on the
camera. Remove the camera from its case and store it in a dry and
well-ventilated location.
• Avoid using or storing the camera where it may be exposed to static
electricity or electrical interference.
• Avoid using or storing the camera in direct sunlight or where it may be
exposed to rapid changes in temperature or to condensation.
• Periodic inspections are recommended every one to two years to
maintain high performance.
Cleaning Your Camera
Storing Your Camera