Operation Manual

97
Shooting Functions
4
3 Press the 4 button.
The range of the selectable area is displayed with broken lines and
a white rectangle appears on it. You can set the AF area by changing
the position and size of this rectangle.
4 Select the AF area.
Available operations
5 Press the 4 button or the shutter release button halfway.
The AF area is set.
You can check the focus lock position (AF point) by magnifying the image
on the monitor, centering around the area in focus.
1 View the subject on the monitor, and press the shutter release
button halfway.
The autofocus system operates.
Four-way controller (2345) Changes the position of the AF area.
E-dial Changes the size of the AF area.
d (G) button Returns the AF area to the center.
The set AF area is saved in the memory even if the autofocus method is
changed or the camera is turned off.
Checking the Focus
OK
OK
OK
K-01_OPM_ENG.book Page 97 Wednesday, February 22, 2012 2:08 PM