Operation Manual

51
Getting Started
2
Turning the Camera On and Off
1 Turn the main switch to [ON].
The camera turns on, and the startup
screen appears.
Set the main switch to the position [OFF]
to turn off the camera.
• Always turn the camera off when not in use.
• The power will automatically turn off when you do not perform any operations
within a set period of time (Auto Power Off). To reactivate the camera, turn it
on again or perform any of the following operations.
- Press the shutter release button halfway.
- Press the 3 button or M button.
• [Auto Power Off] is set to [1min.] by default. You can change the setting in
[Auto Power Off] of the [R Set-up 2] menu. (p.200)
• To turn the camera on in playback mode, turn the main switch to [ON] while
holding down the N button.
• If you do not want to display the startup screen, you can change the setting
in [LCD Display] of the [R Set-up 1] menu. (p.198)
K-01_OPM_ENG.book Page 51 Wednesday, February 22, 2012 2:08 PM