Operation Manual

45
Getting Started
2
3 Pull down the connection cable
cover (1) on the left of the battery
cover, and insert the DC coupler
into the battery chamber until
it locks into place.
To remove the DC coupler, push
the battery lock switch (2)
in the direction of the arrow.
4 Close the battery cover.
The connection cable is pulled out from
the connection cable cover section.
5 Connect the DC coupler and the AC adapter.
6 Connect the AC adapter to the AC plug cord.
7 Plug the AC plug cord into the power outlet.
2
1
K-01_OPM_ENG.book Page 45 Wednesday, February 22, 2012 2:08 PM