Operation Manual

255
Appendix
10
Autofocus does
not work
The subject is not in
the AF area
Position the subject in the AF area on the
monitor. If the subject is outside the AF
area, aim the camera at the subject and
lock the focus, then compose a picture
and press the shutter release button fully.
(p.100)
The subject is too
close
Move away from the subject and take
apicture.
The focus mode is
set to \
Set the focus mode switch to =. (p.95)
The AE Lock
function does
not operate
p mode is set AE Lock is not available in p mode.
The built-in
flash does not
discharge
When the flash
mode is set to C or
C
, the flash will
not discharge if the
subject is bright
Set the flash mode to E (Manual Flash
Discharge) or F (Manual Flash+Red-
eye Reduction). (p.61)
a mode is set
Set the mode dial to any mode other than
a (Flash Off).
K, d, A, Z,
y, U, n, or E of
H mode is set
Set H mode to any mode other than
K (Sunset), d (Blue Sky), A (Night
Scene), Z (Night Scene HDR),
y (Backlight Silhouette),
U (Candlelight), n (Stage Lighting) or
E (Museum). (p.80)
The power
zoom system
does not work
The camera does
not have a power
zoom function
Use manual zoom.
The USB
connection with
a computer
does not work
properly
The USB
connection mode is
set to [PTP]
Set [USB Connection] to [MSC] in
[Interface Options] of the [R Set-up 2]
menu. (p.215)
Problem Cause Remedy
K-01_OPM_ENG.book Page 255 Wednesday, February 22, 2012 2:08 PM