Operation Manual

204

Changing Additional Settings

Press the four-way controller (2) to select [Reset], and press

the 4 button.

The settings are reset, and the screen that was displayed before

selecting the menu item appears again.

You can check the version information for software (firmware) in the

camera. If an update file for the firmware is released, you can update

the camera to the latest firmware version.

Select [Firmware Info/Options] in the [R Set-up 3] menu,

and press the four-way controller (5).

The firmware version for the camera is

displayed on the [Firmware Info/Options]

screen.

At this point, if an update file is saved on

your SD Memory Card, you can run the

update.

Press the 3 button twice.

The screen that was displayed before selecting the menu item appears

again.

Checking the Camera Version Information

Refer to the PENTAX website for more information and procedural details

regarding updates.

• You cannot restore a camera to its previous firmware version after updating

it.

• Before running the update, be sure to save the data on your SD Memory Card

to a computer or other location.

• When the battery level is low, [Not enough battery power remaining to update

the firmware] is displayed on the monitor. Use the AC Adapter kit K-AC1202

(optional) or install a fully charged battery.

Firmware Info/Options

Camera

Ver:X.XX

K-01_OPM_ENG.book Page 204 Wednesday, February 22, 2012 2:08 PM