Operation Manual

196

Changing Additional Settings

You can change the language in which the menus, error messages, etc.

are displayed.

Set in [Language/u] of the [R Set-up 1] menu.

1Setting the Display Language (p.52)

Sets the monitor display when the standby mode display is set to

[Standard Information Display] or [No Information Display].

Select [Live View] in the [A Rec. Mode 3] menu, and press the

four-way controller (5).

The [Live View] screen appears.

Press the four-way controller (5),

use the four-way controller (23)

to select a grid display type,

and press the 4 button.

Select from e (4x4 Grid), f (Golden

Section), g (Scale) or h (default

setting).

Press the four-way controller (23) to select [Histogram

Display] or [Bright/Dark Area], and use the four-way controller

(45) to select O (On) or P (Off).

Setting the Display Language

Setting the Monitor and the Menu Display

Setting the Standby Mode Display Method

Histogram Display Shows the brightness distribution of an image. (p.29)

Bright/Dark Area

Bright (overexposed) portions blink red and dark

(underexposed) portions blink yellow. (p.30)

Show Grid

Histogram Display

Bright/Dark Area

Live View

Cancel

K-01_OPM_ENG.book Page 196 Wednesday, February 22, 2012 2:08 PM