Operation Manual

186
Playback Functions and Image Editing
6
3 Use the four-way controller (23) to select [NTSC] or [PAL],
and press the 4 button.
4 Press the 3 button twice.
The screen that was displayed before selecting the menu item appears
again.
By default, the maximum resolution is automatically selected to suit the AV
device and camera. However, if it fails to play back images properly,
change the setting.
1 Select [Interface Options] in the [R Set-up 2] menu, and press
the four-way controller (5).
The [Interface Options] screen appears.
2 Use the four-way controller (23) to select [HDMI Out],
and press the four-way controller (5).
3 Use the four-way controller (23) to select the HDMI output
format, and press the 4 button.
The video output format differs depending on the region. When you set [Setting
the Time] in the World Time setting (p.193) to X (Destination), the video output
setting changes to the video output format for that city. Refer to “List of World
Time Cities” (p.195) for cities that can be selected as a hometown or destination.
Selecting the HDMI Output Format
Auto
The maximum resolution corresponding to the AV device
and camera is automatically selected. (default setting)
1080i 1920×1080i
720p 1280×720p
480p
576p
720×480p (when [Video Out] is set to [NTSC])
720×576p (when [Video Out] is set to [PAL])
K-01_OPM_ENG.book Page 186 Wednesday, February 22, 2012 2:08 PM