Operation Manual

176
Playback Functions and Image Editing
6
5 Use the four-way controller (23)
to select a parameter, and use the
four-way controller (45) to adjust
the value.
6 Press the 4 button.
The save confirmation screen appears.
7 Use the four-way controller (23)
to select [Apply additional filter(s)]
or [Save as], and press the
4 button.
Select [Apply additional filter(s)] when
you want to apply additional filters to the
same image. The screen that was
displayed in Step 3 appears again.
If [Save as] is selected, the filter-processed image is saved as a new
image.
Retrieves the filter effects of a selected image and applies the same filter
effects to other images.
1 Select a filter-processed image in the single image display.
2 Select D (Digital Filter) in the playback mode palette, and
press the 4 button.
Up to 20 filters, including a digital filter used during shooting (p.148), can be
applied to the same image.
Recreating Filter Effects
Cancel
Cancel
MENU
Red
Red
OK
OK
OK
MENU
OK
OK
OK
Apply additional filter(s)
Apply additional filter(s)
Continue selecting filters?
Continue selecting filters?
Cancel
Cancel
Save as
Save as
K-01_OPM_ENG.book Page 176 Wednesday, February 22, 2012 2:08 PM