Operation Manual

149
Shooting Settings
5
1 Press the M button in standby mode.
The control panel appears.
2 Use the four-way controller (2345) to select [Digital Filter],
and press the 4 button.
The Digital Filter setting screen appears.
3 Use the four-way controller
(2345) to select a filter.
The background image changes
according to the selected filter.
Proceed to Step 7 if you do not need
to change the parameters.
4 Press the M button.
The screen to adjust the parameters appears.
5 Use the four-way controller (23)
to select a parameter, and use the
four-way controller (45) to adjust
the value.
6 Press the 4 button.
The screen that was displayed in Step 3 appears again.
• Digital Filter is not available in the following situations.
- when Z (Night Scene HDR) of H mode, or p mode is set
- when the file format is set to [RAW] or [RAW+]
• When Digital Filter is set, the following functions are not available.
- Continuous Shooting - Multi-exposure
- HDR Capture
• Depending on the filter used, it may take longer to save images.
Cancel
Cancel
Parameter Adj.
Parameter Adj.
MENU
INFO
Toy Camera
Toy Camera
OK
OK
OK
Cancel
Cancel
MENU
Shading Level
Shading Level
OK
OK
OK
K-01_OPM_ENG.book Page 149 Wednesday, February 22, 2012 2:08 PM