Operation Manual

147
Shooting Settings
5
The outcome of cross processing varies each time a picture is taken. If you
take a cross processed image that you like, you can save the Cross
Processing settings used in that image. A total of three Cross Processing
settings can be saved.
1 Press the four-way controller (3) in the single image display
of playback mode.
The playback mode palette appears.
2 Use the four-way controller (2345) to select s (Save
Cross Processing), and press the 4 button.
The camera will search for cross processed images starting from the
most recent image taken. (An hourglass icon is displayed while
searching.) When a cross processed image is found, the screen to save
the settings appears.
If there are no cross processed images, the message [No cross
processed image] appears.
3 Use the e-dial to select a cross
processed image.
4 Use the four-way controller (23) to select [Save as Favorite
1], [Save as Favorite 2] or [Save as Favorite 3], and press the
4 button.
The settings of the selected image are saved to [Favorite 1-3] and the
last displayed image is displayed again.
You can also change the setting from the [A Rec. Mode 1] menu (p.72).
Saving the Cross Processing Settings of a Captured Image
Save as Favorite 2
Save as Favorite 2
Save as Favorite 1
Save as Favorite 1
Saves this image's Cross
Saves this image's Cross
Processing settings
Processing settings
100-0001
100-0001
Save as Favorite 3
Save as Favorite 3
OK
OK
OK
Cancel
Cancel
MENU
K-01_OPM_ENG.book Page 147 Wednesday, February 22, 2012 2:08 PM