Operation Manual

146
Shooting Settings
5
*1 For [Favorite 1-3], you can save the settings of a cross processed image
as a favorite in advance through the playback mode palette. (p.147)
6 Use the four-way controller (45) to adjust the parameter’s
value.
You can check the saturation and hue with the radar chart.
Available operations
7 Press the 4 button.
The screen that was displayed in Step 3 appears again.
8 Press the 4 button.
The camera returns to the control panel.
Muted/Bleach Bypass
Saturation: -4 to +4
Toning: Off/Green/Yellow/Orange/Red/Magenta/
Purple/Blue/Cyan
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness: -4 to 4
Reversal Film Sharpness: -4 to 4
Monochrome
Filter Effect: None/Green/Yellow/Orange/Red/
Magenta/Blue/Cyan/Infrared Filter
Toning: Off/Green/Yellow/Orange/Red/Magenta/
Purple/Blue/Cyan
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness: -4 to 4
Cross Processing Random/Preset 1-3/Favorite 1-3
*1
E-dial Switches between [Sharpness] and [Fine Sharpness].
d (G) button Resets the set value.
Image Tone Parameter
K-01_OPM_ENG.book Page 146 Wednesday, February 22, 2012 2:08 PM