Operation Manual

135
Shooting Settings
5
4 Press the shutter release button fully.
The screen that was displayed in Step 1 appears again.
Adjust the white balance as necessary.
The message [The operation could not be completed correctly] appears
when measuring is unsuccessful. Press the 4 button to remeasure the
white balance.
5 Press the 4 button.
The camera is ready to take a picture.
If a picture is extremely overexposed or underexposed, the white balance may
not be adjusted. In this case, adjust exposure to the correct exposure before
adjusting the white balance.
K-01_OPM_ENG.book Page 135 Wednesday, February 22, 2012 2:08 PM